新界葵涌葵豐街28-36號業豐工業大廈12樓B4室 聯絡電話｜ (+852) 2567 3110
ZEAPON 左輪快拆 Revolver Quick Release
ZEAPON launched the Revolver Quick Release in Q3 of 2021. As the first supporting accessory of the brand, the original design of Revolver Quick Release is inspired by revolver equipment. It features with delicate appearance. The buckle locking structure is fast and efficient.
Blind assembly can be achieved with ergonomic groove alignment. The docking structure of the spacecraft is adopted between the female socket and the male plug, not only seamless but also stable and firm; the quick release is of a cup size while it can bear a load up to 10 kg.
It can be applied to both small micro SLR camera and television camera; It can be used widely, from single photographer to professional film and television studios.
The photographers can switch the equipment rapidly between different stands, greatly improving the shooting efficiency.
The launch of the Revolver Quick Release enriches ZEAPON product line, and also sets a foundation for the improvement and enrichment of brand support system in the future.
ZEAPON will keep bringing more practical equipment for the photographers.
- Snap Unlocking for Quick
& Right Operation
- 30° Groove Alignment Redefines
- Docking Structure of the Spacecraft
is Tight and Seamless
SNAP UNLOCKING FOR QUICK & RIGHT OPERATION
The design concept of snap unlocking with a powerful appearance was inspired by the revolver equipment. It is efficient and ergonomic. Fixed with the buckle，you can release it just by a snap in a quick and stable way. It can effectively avoid the loosening of quick release caused by unlocking.
You can switch the equipment rapidly between different stands. It greatly improves the shooting efficiency.
30° GROOVE ALIGNMENT REDEFINES BLIND ASSEMBLY
4 and 6 arc grooves are respectively arranged on the edge of the quick release female socket and the quick release head for alignment and locking.
The groove size and arcs conform to ergonomics, and the photographer can easily lock it by hand.
The angle of rotation alignment is less than 30°, which achieves blind assembly.
DOCKING STRUCTURE OF THE SPACECRAFT IS TIGHT AND SEAMLESS
The connection between the quick release female socket and the quick release head skillfully includes the docking structure of the spacecraft and the modern mechanical structure. When the female socket is released, put the quick release head into the female socket, at the same time, press the locating pin, and the inner rotating buckle is released immediately, and the triangular contact point of the male head is clamped by dislocation.
The whole system is stable, firm and seamless. The secondary locking is not needed.
THIN AND COMPACT WITH LARGE BEARING CAPACITY
Compact and smaller than a hand. Bearing capacity of 10 KG. It can be applied to both small micro SLR camera and television camera.
The thickness of the system is 34mm. You don’t need to worry about the height and angle of the camera after installing the quick release.
2-IN-1 INTERFACE, TIME SAVING AND HIGH EFFICIENCY
The quick release plug is equipped with 1/4 and 3/8 2-in-1 screws, compatible with the equipment such as tripod, pan tilt and slide rail on the market; No conversion is required. It is flexible and stable, saving the time and improving the efficiency.
WIDE APPLICATION SCENARIOS
You can switch between multiple equipment and multiple stands by using Revolver Quick Release, which is perfectly suitable for the mono-pod, tripod and slide rail stands;
It supports various types of cameras, photographic lights, camera dolly, stabilizers and other equipment;
It can be applied to individual shooting, outdoor travel shooting, small studio, movie theater shooting, etc.
EMERGENCY UNLOCKING SYSTEM
A special tool pry opening position is available, and you can loosen the female socket with a screwdriver,
so as to prevent the female socket from being unable to unlock by accidental clamping. The upgraded safety reduces the shooting accidents.
ROBUST AND RELIABLE PRODUCTS WITH INGENUITY
High precision CNC processing. Sandblasting anodizing improves the hardness,
featuring with wear-resistant and robust quality that prevents aging.
SCRATCH RESISTANT SILICONE PAD
A scratch resistant silicone pad is attached on the surface of quick release head to avoid scratching
and effectively protect valuable equipment.
Revolver Quick Release
|Packing List||Revolver Quick Release , User’s Manual , Warranty Card , Hexagon Wrench|
|Product Weight||260 g|
|Product Size||85.50mm * 69.00mm * 33.50mm|
|Materials||Aluminum Alloy & Stainless Steel & Silicone|
|Load-bearing Capacity||10 kg|